Top explanations you might need a heating and air conditioning repair repair.

Top explanations you will need http://www.airrepairpros.com/mckinney/

 

Among the most detrimental inner thoughts on the planet is having to contact a residential HVAC technician within the dead of winter since your heat is not activating. And there are some things you should check before you call a heater repair technician, because there are a number of reasons why your heater may not work.

Filtration system

 

You could have a filter that is full of dirt if your furnace turns on but does not seem to be blowing air. You need to change your filter following every single season. If you check your filter and find that it is dirty, change it right away.

 

Circuit breaker

 

If your thermostat appears to be working OK but your furnace is not turning on at all, the circuit breaker could be tripped. This is an easy fix, as all you have to do is check the circuit for your furnace in your circuit box and reset it if necessary.

 

Pilot light

 

If you have a gas furnace, there is a pilot light that ignites your gas burner to provide the heat for the unit. This light may be out, and of course if it really does, your heater won’t blow hot air. You can easily check the pilot light and relight it if necessary. You should call in a heater repair technician if you smell a strong odor of natural gas.

 

Ignition sensor

 

A problem with your ignition sensor is another reason your furnace might not exactly perform. These units are consistently exposed to fire and can get used up on the ends. Your furnace may not turn on or may not stay on if that happens. You can remove the sensor and use a brillo pad or piece of sandpaper to get rid of the soot. However, the sensor is probably bad and will need to be replaced by a professional if that doesn’t fix the problem.

 

Thermostat

 

A typical basis for a furnace to not function is a problem with the thermostat. Check to make sure your thermostat is set to “heat” rather than “cool” if your heater isn’t turning on. If you have a programmable thermostat, check to make sure that there isn’t a time and date setting programmed in that is preventing the heater from coming on. If the problem is with your thermostat, it is an easy and relatively cheap fix, and that is good news.

Checking these common conditions can assist you to troubleshoot your furnace challenges and get away from having to pay for http://www.airrepairpros.com/mckinney/